Primer

Silicone Exterior Primer

Name: Silicone Exterior Primer
Brand: Luna Tones

Sold by quote

Water-based, acrylic copolymer binder-based, matt, filled and siliconised exterior primer.

Coverage10–12 m²/kg

Full cure24 hours

Application temp.+5 °C to +30 °C

Packaging

20 kgIn stock3.5 kgOut of stock

Request a quote Contact

Technical documents:

Where to use

Applied before the topcoat paint on all kinds of plastered surfaces (concrete, gas concrete, briquette, brick, mineral plaster, etc.).

How to apply

Before application, dirty, dusty, flaking and previously painted surfaces must be thoroughly cleaned by scraping. Dilute with a maximum of 10% water by volume and apply in a single coat using a roller. Depending on the type, absorbency and structure of the surface, 1 kg of Luna Tones Silicone Exterior Primer covers approximately 10–12 m² (*). (*) Since consumption may vary depending on the surface, ambient temperature and application conditions, the stated coverage rates are for guidance only. For exact consumption, a controlled sample application should be carried out.

Storage conditions

Store in a closed environment, in its original sealed packaging, between +5 °C and +35 °C for 12 months.

Important notice

Since factors such as application conditions, consumption amount, surface texture, air and surface temperature, thinning ratio and application thickness may vary, the consumption rates are given for recommendation purposes only. A controlled sample test should be carried out for precise consumption. Drying times may vary depending on the ambient and surface temperature, humidity levels and application thickness.

Shows excellent adhesion to all kinds of surfaces. It is easy to apply, dries quickly and has high alkali resistance. It increases the adhesion of the paint to the surface by acting as a bridge between the applied surface and the topcoat paint, while also reducing paint consumption.

Water-based

Complies with the G Communiqué (manufacturer's declaration)

Coverage10–12 m²/kg

Full cure24 hours

Application temp.+5 °C to +30 °C

Base / formulation	Water-based, acrylic copolymer binder, with silicone
Gloss	Matt
Coverage	10–12 m²/kg
Colour	White
Pattern	Smooth
Full cure	24 hours
Dilution Ratio	Max. 10% with water
Surfaces	Concrete, aerated concrete, block, brick, mineral renders
Application temperature	+5 °C to +30 °C
Shelf life	12 months (unopened)
Safety	MSDS
G Communiqué	Manufacturer's declaration: complies with the G Communiqué

Roller / brush

Clean the surface

Protect from frost

Stir before use

PDFProduct catalogueDownload PDF

Hazard Statements

H317: May cause an allergic skin reaction.

Precautionary Statements

P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P103: Read label before use.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P362+P364: Take off contaminated clothing and wash it before reuse.
P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
P321: Specific treatment (see label).
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.