Interior

Silicone Elite Soft Mat Interior Wall Paint

Sold by quote

Water-based, silicone-modified soft matt interior wall paint. Resists wiping and scratching; 12–18 m²/L, 15 / 7.5 / 2.5 L.

Coverage12-18 m²/L

Full cure24 hours

Application temp.+5 °C to +30 °C

Packaging

15 LOut of stock7.5 LOut of stock2.5 LOut of stock

Request a quote Contact

Colours

Pure White LT001 Snow White LT002 Pearl White LT003 Cream LT004 Ivory LT005 Milk White LT006 Antique White LT007 Beeswax LT008 Lavender Mist LT011 Rose Morning LT012 Mint Leaf LT013 Baby Blue LT014

See all 58 colours Try it on your wall

Technical documents:

Where to use

Applied for decoration and protection on interior walls finished with skim plaster or gypsum (concrete, aerated concrete, block, brick, etc.).

How to apply

Before application, the surface must be cleaned; existing cracks and voids must be repaired. On absorbent surfaces, apply 1/7 Concentrated Clear Primer or Opaque Acrylic Primer. After the primer has dried, apply Elite Soft Matte Interior Wall Paint in two coats with a brush or roller. The paint may be thinned with water by 5–10% by volume if necessary.

Shows excellent adhesion to all kinds of surfaces and does not crack or peel. Resists wiping with water and scratching. Its breathable film lets damp in the wall escape.

Water-based

Washable

Complies with the G Communiqué (manufacturer's declaration)

Coverage12-18 m²/L

Full cure24 hours

Application temp.+5 °C to +30 °C

Base / formulation	Water-based, acrylic copolymer
Gloss	Soft Matt
Coverage	12-18 m²/L
Colour	Variable
Pattern	Smooth
Full cure	24 hours
Dilution Ratio	Max. 10% with water
Surfaces	Concrete, aerated concrete, block, brick, skim plaster, gypsum
Application temperature	+5 °C to +30 °C
Shelf life	12 months (unopened)
G Communiqué	Manufacturer's declaration: complies with the G Communiqué

Roller / brush

Clean the surface

Protect from frost

Stir before use

PDFProduct catalogueDownload PDF

Hazard Statements

H317: May cause an allergic skin reaction.

Precautionary Statements

P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P103: Read label before use.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P362+P364: Take off contaminated clothing and wash it before reuse.
P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
P321: Specific treatment (see label).
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.