This document is a translation of the original Turkish document. The original Turkish document is the binding text.
Technical Data Sheet
Pro Matt Interior Wall Paint
Product description
Water-based, matt interior top-coat paint with an acrylic copolymer binder.
Product properties
Adheres excellently to all kinds of surfaces. Does not crack or flake. A decorative paint that is easy to apply and gives good hiding power.
Areas of use
Applied for decorative and protective purposes on wall surfaces finished with fine plaster or gypsum (concrete, aerated concrete, briquette, brick, etc.).
Application
Clean the surfaces of all dirt, grease and loose or blistered layers. Then, depending on the substrate (previously painted, gypsum, base plaster, etc.), apply a primer coat of LUNA TONES 1/7 CONCENTRATED CLEAR PRIMER or LUNA TONES OPAQUE ACRYLIC PRIMER. Highly absorbent surfaces must be primed before painting. Thin with water by max. 10 % by volume and apply by brush or roller. Depending on the type, absorbency and structure of the surface, 1 kg of LUNA TONES PRO MATT INTERIOR WALL PAINT covers 8–12 m² (*) in one coat. (*) Consumption can vary with the surface, air temperature, application conditions, thinning ratio and film thickness, so the stated rates are recommendations. Run a controlled sample application to determine exact consumption.
Storage
Store indoors in the tightly closed original packaging between +5 °C and +35 °C for 12 months.
Hazard and safety warnings
Hazard statement
- H317 May cause an allergic skin reaction.
Precautionary statements
- P101 If medical advice is needed, have the product container or label at hand.
- P102 Keep out of reach of children.
- P103 Read the label before use.
- P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
- P280 Wear protective gloves/protective clothing/eye protection/face protection.
- P362+P364 Take off contaminated clothing and wash it before reuse.
- P333+P313 If skin irritation or rash occurs: get medical advice/attention.
- P321 Specific treatment (see the label).
- P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Product data
| Gloss | Matt |
|---|---|
| Packaging | 20 kg – 10 kg – 3.5 kg |
| Texture | Smooth |
| Drying time | Full cure 24 hours |
| Thinning | Max. 10 % by volume |
| Application temperature | +5 °C to +30 °C |
| Thinner | Water |
| Standard | Complies with the G Communiqué |
| Safety | MSDS |
Note
Consumption rates are recommendations, as application conditions, consumption, surface profile, air and surface temperature, thinning ratio and film thickness can vary. Run a controlled sample application to determine exact consumption. Drying times vary with ambient and surface temperature, humidity and film thickness.