This document is prepared from the product information on our website. Ask our technical team for binding values and the latest version.

Technical Data Sheet

Silicone Lunateks Textured Exterior Coating

Product description

Water-based, acrylic copolymer binder-based, silicone-reinforced, matt, grainy topcoat exterior cladding material, textured with a coral roller.

Product features

Shows excellent adhesion to all kinds of surfaces. It does not crack or peel. It has high alkali resistance. It is extremely resistant to sunlight, moisture and salty seawater on coastlines. Depending on the applicator's roller technique, a fine or thick pattern can be obtained. With its breathability, it helps moisture in the wall escape.

Where to use

Used on all kinds of plastered surfaces (concrete, gas concrete, briquette, brick, mineral plaster, etc.).

How to apply

Clean the surfaces of all dirt, oil, loose and flaking layers, and of dust that may prevent the topcoat and primer from adhering, then prime them with Luna Tones Silicone Exterior Primer or Luna Tones Opaque Acrylic Primer. After the primer has dried, apply Lunateks Textured Exterior Coating in a single coat. It is ready to use. Spread the material evenly with a roller, then create the desired texture with a coral roller. Depending on the type, absorbency and structure of the surface, 1 kg of Lunateks Textured Exterior Coating covers approximately 1–1.5 m² (*). (*) Consumption may vary depending on texture thickness, surface, temperature and application conditions; the stated coverage rates are therefore for guidance only. A controlled sample application should be carried out to determine exact consumption.

Storage conditions

Store in a closed environment, in its original sealed packaging, between +5 °C and +35 °C for 12 months.

Important notice

Since factors such as application conditions, consumption amount, surface texture, air and surface temperature, thinning ratio and application thickness may vary, the consumption rates are given for recommendation purposes only. A controlled sample test should be carried out for precise consumption. Drying times may vary depending on the ambient and surface temperature, humidity levels and application thickness.